Mainos / Advertisement:

Ero sivun ”RouterOS DHCP/en” versioiden välillä

Kohteesta Taisto
Siirry navigaatioon Siirry hakuun
(Ak: Uusi sivu: === Mikrotik and Windows Deployment Services ===)
(Ak: Uusi sivu: Here is an example how you can get Mikrotik DHCP to work with WDS. Define additional settings to your DHCP server in the same fashion as the pictures.)
Rivi 47: Rivi 47:
 
=== Mikrotik and Windows Deployment Services ===
 
=== Mikrotik and Windows Deployment Services ===
  
Tässä esimerkki miten saa Mikrotikin DHCP:n toimimaan WDS:n kanssa. Määritä kuvankaappausten perusteella lisäasetukset DHCP palvelulle.
+
Here is an example how you can get Mikrotik DHCP to work with WDS. Define additional settings to your DHCP server in the same fashion as the pictures.
  
 
   Next Server = WDS-palvelimen IP-osoite
 
   Next Server = WDS-palvelimen IP-osoite

Versio 21. elokuuta 2015 kello 07.34

Muut kielet:
English • ‎suomi


With DHCP (Dynamic Host Configuration Protocol) it is easy to manage and assign IP-addresses for client devices in your network. Mikrotik RouterOS has DHCP client and DHCP server support.

DHCP Server

Make sure you have defined a static IP address for the Mikrotik router. In our example we use the 192.168.100.0 /24 network. In Mikrotik we have assigned the first address of the network to be 192.168.100.1 /24. Note, that Mikrotik starts assigning addresses from the address pool's end instead of the start like most DHCP servers.

1. We create a DHCP pool. In our example the pool assigns addresses between 192.168.100.10 and 192.167.100.200.

 /ip pool add name=dhcp_pool address=192.168.100.10-192.168.100.200

2. We create the settings for the new DHCP pool. In the settings we define the default gateway and DNS servers.

/ip dhcp-server network add address=192.168.100.0/24 gateway=192.168.100.1 netmask=24 dns-server=192.168.100.1

3. We create the DHCP server. Here we define which ports will get their addresses by DHCP and from which pool (we add the pool we just created) as well as lease time (time until an assigned address is released, once the device the address has been given to is disconnected.).

 /ip dhcp-server add name=dhcp-server interface=ether1 lease-time=24:00:00 address-pool=dhcp_pool


DHCP Exclusion

With DHCP Exclusion you can define certain IP addresses to only be given to devices with a specific MAC address. When a device with the defined MAC address is connected to the network, it will be given the predefined address from the DHCP server.

 /ip dhcp-server lease add address=192.168.100.100 mac-address=11:22:33:44:55:66

Mikrotik and Windows Deployment Services

Here is an example how you can get Mikrotik DHCP to work with WDS. Define additional settings to your DHCP server in the same fashion as the pictures.

 Next Server = WDS-palvelimen IP-osoite
 Boot File Name = Tiedosto joka ladataan ensimmäisenä WDS palvelimesta
 DHCP Options = 060 PXEClient

DHCP Client

DHCP Client ominaisuus mahdollistaa Mikrotikin verkkoasetusten hakemisen DHCP palvelimelta.

 /ip dhcp-client add interface=ether1 disable=no
  • Interface = Portti josta pyydetään DHCP paketit
  • disable no = Otetaan käyttöön
Mainos / Advertisement: