Mainos / Advertisement:

Ero sivun ”WLAN/en” versioiden välillä

Kohteesta Taisto
Siirry navigaatioon Siirry hakuun
(Ak: Uusi sivu: Same as "ap-bridge", but only allows one connected client at a time.)
(Ak: Uusi sivu: * ''manual'' All data must manually be defined their transmit power.)
 
(11 välissä olevaa versiota samalta käyttäjältä ei näytetä)
Rivi 22: Rivi 22:
 
==== alignment only ====
 
==== alignment only ====
  
Pistää interfacen jatkuvaan kuljetustilaan joka ohjaa kaiken liikenteen ulkoiselle antennille
+
Sets the interface to continuous transmitting state which directs all traffic to an external antenna.
  
 
==== nstreme-dual-slave ====
 
==== nstreme-dual-slave ====
  
Sallii interfacen olevan nstreme-dual kokoonpano käytössä
+
Permits the interface to be used with nstreme-dual
  
 
==== wds-slave ====
 
==== wds-slave ====
  
Sama kuin ''ap-bridge'', mutta scannaa ap:ta samalla ssid ja nostaa ylös wds-linkin. Jos linkki katoaa ulottuvilta, jatkaa scannausta.
+
Same as "ap-bridge", but scans the access point's ssid and establishes a wds-link. If the link is severed, it will keep scanning.
  
 
==== station-pseudobridge ====
 
==== station-pseudobridge ====
  
Sama kuin ''station'', mutta lisää mac-osoite muuntamisen kaikkeen liikenteeseen
+
Same as "station", but adds MAC-address faking to all traffic.
  
 
==== station-pseudobridge-clone ====
 
==== station-pseudobridge-clone ====
  
Sama kuin''station-pseudobridge'', mutta käyttää ''station-bridge-clone-mac'' osoitetta yhdistääkseen access-pointtiin.
+
Same as "station-pseudobridge", but uses "station-bridge-clone-mac" address to connect to the access point.
  
 
==== station-bridge ====
 
==== station-bridge ====
  
Tässä tilassa ap ylläpitää edelleenlähetettävää taulua mac-osoitteista jotka ovat saatavilla clienttien kautta ym.
+
In this state the AP keeps a distributable table of mac-addresses which it has been given from client machines or from other access points' tables.
  
== Pieniä säätöjä ==
+
== Small adjustments ==
  
 
=== tx-power-mode ===
 
=== tx-power-mode ===
  
Tässä määritellää tx-power (transmit) tila langattomalla kortilla. Oletusasetus on ''Default''
+
Here we define the tx-power (transmit) state on the wireless interface. Default setting is "Default".
  
 
* ''all rates fixed''
 
* ''all rates fixed''
Käyttää samaa transmit poweria kaikille data arvoille.
+
Uses the same transmit power for all data.
  
 
* ''card rates''
 
* ''card rates''
Käyttää niitä transmit asetuksia mitkä on Tx power asetuksissa asetettu
+
Uses those transmit settings which have been defined in Tx power's settings.
  
 
* ''default''
 
* ''default''
Käyttää niitä arvoja joita wlan kortissa on oletuksena sisällä
+
Uses those settings which came by default in the WLAN interface card.
  
 
* ''manual''
 
* ''manual''
Kaikille data arvoille käyttää omaa erityisesti määriteltyä arvoa.
+
All data must manually be defined their transmit power.
  
  

Nykyinen versio 21. heinäkuuta 2015 kello 05.54

Muut kielet:
English • ‎suomi

Different modes

station

Basic station. Find and connects to a suitable access point.

station-wds

Same as "station", but creates a wds bridge with the AP using proprietary extension.

NOTE, the AP must be configured to permit wds connections.

ap-bridge

Basic access point

bridge

Same as "ap-bridge", but only allows one connected client at a time.

alignment only

Sets the interface to continuous transmitting state which directs all traffic to an external antenna.

nstreme-dual-slave

Permits the interface to be used with nstreme-dual

wds-slave

Same as "ap-bridge", but scans the access point's ssid and establishes a wds-link. If the link is severed, it will keep scanning.

station-pseudobridge

Same as "station", but adds MAC-address faking to all traffic.

station-pseudobridge-clone

Same as "station-pseudobridge", but uses "station-bridge-clone-mac" address to connect to the access point.

station-bridge

In this state the AP keeps a distributable table of mac-addresses which it has been given from client machines or from other access points' tables.

Small adjustments

tx-power-mode

Here we define the tx-power (transmit) state on the wireless interface. Default setting is "Default".

  • all rates fixed

Uses the same transmit power for all data.

  • card rates

Uses those transmit settings which have been defined in Tx power's settings.

  • default

Uses those settings which came by default in the WLAN interface card.

  • manual

All data must manually be defined their transmit power.


wds-mode

  • disabled
  • dynamic
  • dynamic mesh
  • static
  • static mesh

wireless-protocol

  • 802.11
  • any
  • nstreme
  • nv2
  • nv2 nstreme
  • nv2 nstreme 802.11
  • unspecified
Mainos / Advertisement: